Your system is 12–15+ years old and needing frequent repairs
Energy bills are climbing despite regular maintenance
Your home has uneven temperatures or humidity problems
Repair costs are approaching 50% of a new system's price
Your current system uses R-22 refrigerant (phased out)
High humidity no matter how hard you run your system
.jpg)
Most heating systems in Katy sit idle 8 months a year, then have to start on the coldest night of the year. When a furnace or heat pump is 12 to 15 years old and needs a major part every winter, replacement usually costs less than the repairs it would take to keep it going.
We replace gas furnaces, heat pumps and air handlers in Katy, Cypress, Richmond, Fulshear, Sugar Land and across Houston. Every replacement starts with a load calculation for your home, not a copy of the size on the old label. We are factory authorized dealers for American Standard, Carrier, Lennox, Ruud, LG and Mitsubishi. We handle the permit and inspection, haul off the old equipment and register the warranty in your name.
A gas furnace makes sense when the home already has gas service and you want the hottest supply air on a freezing night. We size it to the home and match it to the AC coil so both halves of the system work together.
The reasons Katy homeowners replace a furnace most often:
Free estimates on complete matched systems. Save $250 on a new furnace with code WINTER26FURNACE through December 31, 2026. Financing available through Hearth.
Understanding the installation process helps you prepare and know what to expect. Professional heating and furnace installation involves multiple steps to ensure your new system operates safely and efficiently.
Initial Assessment
Our technician or system deisgner evaluates your home's heating and cooling requirements. This includes measuring square footage, inspecting ductwork, and calculating the cooling load. We review your current system's performance and discuss any comfort issues you want to address.
System Selection
Based on the assessment, we recommend equipment matched to your home's needs. You'll receive options at different efficiency levels so you can choose what fits your budget and goals.
Installation Day
The process includes:
Remove old indoor and outdoor equipment
Position new units in approved locations
Connect refrigerant lines between components
Complete electrical connections and wiring
Inspect and modify ductwork if needed
Charge system with proper refrigerant levels
Program thermostat and test all functions
Inspections and Timeline
Our team handles all permit applications and coordinates final inspections when neccesary. Most residential installations complete in one day. Complex systems or ductwork modifications may extend the timeline.
We tell you the cost before we start, and we offer financing when a full replacement is genuinely the right call. A broken or inefficient system doesn't have to mean an impossible bill.
CODE:WINTER50REPAIR. The $50 comes off your repair invoice. The diagnostic is a separate, standalone fee and is not discounted or credited toward the repair. Valid on a client's first repair with Beede AC & Heating. One coupon per home. Mention when booking or show your tech. Cannot be applied after payment. Expires 12/31/2026. Stacks with 3% educator and first responder discount. Not valid on maintenance, installations. No cash value. Not combinable with other coupons.
CODE:WINTER26FURNACE. $250 comes off the installed price on your signed proposal. Labor, permit, and haul-away included. One coupon per home. Present before signing. Expires 12/31/2026. Stacks with the 3% educator and first responder discount. Not valid on repairs, maintenance. Not combinable with other coupons. No cash value.
Most Katy homes heat with either a gas furnace or a heat pump, and for a lot of them a heat pump is the better fit. Our winters are short and mild, so a heat pump handles most cold nights efficiently, and the same outdoor unit cools the house all summer. If you want gas backup for the few hard freezes we get, a dual-fuel system pairs a heat pump with a gas furnace and switches between them automatically.
We size every heat pump with a load calculation rather than matching the old system's size, and we match it to the duct system and air handler it will work with. Permits are pulled, the old equipment is hauled away, and financing is available through Hearth on full system replacements.
We are factory authorized dealers for American Standard, Carrier, Lennox, Ruud, LG and Mitsubishi, and we service every brand.
Heat pump or gas furnace for a Katy home?
For most Katy homes, a heat pump runs efficiently through our mild winters and replaces two pieces of equipment with one outdoor unit. A gas furnace still makes sense if you already have gas service and want the hottest supply air on freezing nights, and dual fuel gives you both. We tell you which fits your house when we quote it, and estimates on complete matched systems are free.
Most homes are done in 1 day. A system that needs duct changes or a new electrical circuit can take 2.
If both are close in age, yes. The indoor coil sits on top of the furnace, and a matched system is rated, warrantied and sized as 1 unit. Replacing them together also means 1 permit, 1 crew and 1 install day.
It depends on the size of the home, the efficiency you choose and whether the AC coil is replaced at the same time. We price it flat and in writing at the estimate, and estimates are free on complete matched systems.
Yes. We replace furnaces and heat pumps in Cypress, Richmond, Fulshear, Sugar Land, Brookshire and across Houston, out of the same Katy trucks.