Heating Maintenance in Katy, TX

z

Furnace Maintenance in Katy and Houston

Your heater sits idle for 8 months in Houston. Then the first cold front rolls in and it has to fire up on the coldest night of the year. That's when we see cracked igniters, dirty flame sensors and furnaces that won't stay lit.

A fall tune-up is the best way to make sure your heat works when you need it, and that your furnace runs safely. We're a family-owned company based here in Katy and have been maintaining heating systems across this area since 2010.

Maintenance pricing is simple: $109for your first system. $59 for each additional system.
Included with Beede Preferred.

woman enjoying ac

What Our Heating Tune-Up Service Includes:

Every heating maintenance visit covers the same 14-point checklist. Your technician works through all of it and leaves you with a report on the condition of your system.

Safety checks:
Carbon monoxide test at the furnace and supply air
Gas line and valve checked for leaks
Flue and venting inspected for blockage and proper draft
Heat exchanger inspected for cracks and corrosion
High-limit and rollout safety switches tested

‍Heating performance:
Burners inspected and cleaned
Flame sensor cleaned and tested
Igniter checked for wear
Temperature rise measured to confirm the furnace is heating to spec

‍Air side and electrical:
‍
Air filter checked, with a replacement recommendation and the correct size noted for you
Blower motor and wheel assessed for wear and buildup
Capacitor tested under load
Electrical connections tightened and breaker checked
Thermostat heat mode tested

If we find something that needs attention, we show you, explain what it does, and quote it before anything happens.

Beede technician performing AC maintenance on a Katy homechecking drain line hvacmedia filter hvac cabinet

Signs Your Furnace Is Overdue for Maintenance

A burning smell that doesn't go away after the first few minutes?
‍The furnace turns on and off or won't stay lit?
‍Cold rooms or weak airflow from the vents?
Gas bills climbed without a rate change?
A yellow or flickering flame instead of steady blue?
‍It has been more than 12 months since a technician checked it?

Already Not Heating?
‍
Schedule Heating Repair

System 12+ years old?

‍See Heating Replacement

When to Schedule

We recommend two maintenance visits per year. One in the fall before heating season and the second in the spring before cooling season. Book your heating tune-up in October or November, before the first cold front. That's when every HVAC company in Houston gets slammed with no-heat calls.

Join our Beede Preferred membership to automatically include your two visits annually, along with many other benefits.

Why heating maintenance matters in Houston

Your furnace sits for 8 months. Dust settles on the burners and flame sensor, and the first cold night is when it has to work. That is when we see igniters crack and furnaces that will not stay lit.

Safety comes first. Every heating visit includes a carbon monoxide test and a heat exchanger inspection. A crack you cannot see can leak into the air you breathe.

Heat pumps need it too. A heat pump heats with the same outdoor system that cooled your home all summer. We check the defrost cycle, reversing valve and backup heat strips so it is ready for the first cold front.

Frequently asked questions

When should I schedule heating maintenance?

October or November, before the first cold front. That is when no heat calls fill every HVAC calendar in Houston.

What does it cost?

$109 for the first system and $59 for each additional system. Both visits are included in Beede Preferred.

Do you test for carbon monoxide?

Yes, at the furnace and at the supply air, on every heating maintenance visit.